Starch ethers

Alenal starch ethers are modified starches derived from potato, corn, tapioca, and wheat. They can be used for plasters (to improve stability and facilitate screeding), tile adhesives (to prevent tiles from getting dislodged), filling compounds (to improve the gliding properties for screeding and to prolong the open time), and as thickeners in paint systems.

Alenal ST-801

Alenal ST 801 is a special starch that is mainly used in the building-chemistry. It has a behaviour that increases the consistency. In respective combination with cellulose-ethers optimal settings of non-sag properties, working properties and water retention are possible. Alenal ST 801 is used in all systems which are based on gypsum, cement and lime.

Alenal ST-902

Alenal ST 902 is a special starch ether for construction products. It effects a pseudoplasticity and increases the consistency of the building material. A low adhesiveness to the tools allows a easy handling of the product. Water retention is controlled by combination with cellulose ether. Alenal ST 902 is dosed depending on the application in the range from 0.005 to 0.3%.

Alenal ST-700

Alenal ST 700 is a non-ionic starch ether and it is used as an universal additive in the building industry i.e. for: > component with other polymers/fillers for the building industry > component in tiles adhesives > in mixture with cement to improve the workability

Alenal ST-805

Alenal ST 805 is a special starch that is mainly used in the building-chemistry. It has a behaviour that increases the consistency. In respective combination with cellulose-ethers optimal settings of nonsag properties, working properties and water retention are possible. Alenal ST 805 is used in all systems which are based on gypsum, cement and lime.

Alenal ST-811

Alenal ST 811 is a cold water soluble starch-ether based on potato starch. Alenal ST 811 is a special starch, which is mainly used in the building – chemistry. Using Alenal ST 811 gives a good stability to building materials even if the dosage is very low.

Alenal ST-912

Alenal ST 912 is a cold water soluble starch-ether based on maize starch. Alenal ST 912 is a special starch, which is used for the dry spraying method and wet spraying method. The starch will be used to reduce the amount of rebound and dust. If there is the possibility to pre-moisturize the dry shotcrete Alenal ST 912 can develop its quality better.

Alenal ST-720

Alenal ST 720 is a highly modified starch ether for the building industry. Alenal ST 720 should be used in combination with cellulose derivatives. In this combination are synergistic effects to see like improving workability sag resistance in tile adhesives and good compatibility with many cellulose derivatives.

Alenal ST-705

Alenal ST 705 is highly modified potato starch ether for the building industry. It is used for dry gypsum and cement based mortars and tile adhesives. Alenal ST 705 should be used in combination with cellulose derivatives. In this combination are synergistic effects to see such as > improved workability > sag resistance in tile adhesives

Alenal ST-1250

Alenal ST 1250 is a highly modified tapioca starch for the construction industry. The application of Alenal ST 1250 includes gypsum- and cement-based dry mortar. Alenal ST 1250 is perfect for tile adhesives! It should be used in combination with cellulosic derivatives. Alenal ST 1250 offers the following advantages: > improved workability through very creamy consistency and good behavior > excellent sag resistance in adhesives, plaster and repair mortar, as well as in tile adhesives for large format tiles > lower delay in the cement setting

Alenal ST-1350

Alenal ST 1350 is a highly modified tapioca starch with other special additives for excellent sag resistance. Application area is the construction industry. The application of Alenal ST 1350 includes gypsum- and cement-based dry mortar. The product is suitable for all binder systems. Alenal ST 1350 offers very good thickening with low dosage. The stickiness becomes reduced. Alenal ST 1350 improves significantly workability through creamier consistency and very good gel behavior. Due to the high sag resistance Alenal ST 1350 is especially suitable for use in: > high sag resistance Tile grouts > Tile adhesive for large format tiles > highly sag resistance plaster systems such as light plasters, renovation plasters, repair mortars, etc. > high sag resistance Joint fillers The thickening effect is very easy to control.

Experience ALENAL SOLUTION

Get in touch to request our product brochure and samples and learn all about our efficient, solution-oriented dry mortar additives.